ServicesEntry Doors
Entry Door Replacement in Celeste
We replace worn front, back and side entry doors with new units hung square, sealed tight and locking clean. You get a free quote and an honest look at timing, so the swap happens when it suits your budget, not after the door finally quits.

A new entry door, done on your timeline
Most entry doors do not fail all at once. The bottom of a wood door soaks up water and swells. The weatherstrip flattens. The latch stops lining up with the strike plate. Each problem is small, so it is easy to put off until the door will not close in January or lets in heat all summer.
We would rather catch it earlier. We look at the door, the frame and the threshold, tell you how much life is left, and help you pick a time to replace it. If the door has a few good years in it, we say so. That gives you room to save up or use our 0% Financing options instead of making a rushed call.
We install fiberglass and steel entry doors, with or without sidelights and transoms. If your windows are also near the end, we can plan window replacement alongside the door so you only have one install to work around.
What the job includes
- Measuring the rough opening
- We measure the opening itself, not just the old door. That tells us if a standard size fits or if the frame needs a custom unit.
- Checking the frame and sill
- We pull the old door and look at the jambs and subfloor under the threshold. Soft or rotted wood gets pointed out and photographed before we go further, so nothing is a surprise on the bill.
- Pre-hung door installed plumb
- The new door comes pre-hung in its own frame. We shim it plumb and level, fasten it through the jambs, and check the swing and gap all the way around.
- Sealing against air and water
- We flash the sill, insulate the gap between frame and wall with low-expansion foam, and caulk the exterior trim. New weatherstrip and a sweep close the bottom.
- Hardware and lock set
- We install the handle set and deadbolt, and set the strike plates so the bolt throws without you having to push on the door.
- Cleanup and haul-off
- The old door and frame leave with us. We sweep up and walk you through the new door before we pack the truck.
Signs your entry door is due
You feel air at the edges
Hold your hand along the door on a windy day. A draft at the sides or bottom means the seal is gone or the door has warped out of shape.
The door sticks or drags
Clay soil in North Texas shifts with wet and dry spells, and frames get pulled out of square. If you have to lift or shoulder the door to latch it, the frame may be moving.
Soft wood near the threshold
Press a key or a small tool against the lower jamb, where it meets the sill. Wood that gives or feels spongy tells you water has been working in behind the trim.
Daylight under or around the door
Light means air, bugs and water can get in too.
The deadbolt fights you
When the bolt only throws if you pull the door tight, the door and frame no longer line up. That weakens security as well as comfort.
How it goes, start to finish
- 1
Free in-person consultation
One of us visits your home and checks the door, the frame and the threshold. We go over style, glass and hardware choices with you. Then you get a written quote with each part of the job on its own line.
- 2
Pick a date that works
Doors are often ordered to size, so we give you an expected delivery window. You choose the install date, and we can plan around a season or a budget month.
- 3
Install day
Most single doors are out and in the same day. We lay down floor protection, remove the old unit, fix any frame issues you approved, and set the new door. Your home is closed up again before we leave.
- 4
Final check
We test the swing, the seal and the locks with you, hand over the keys, and haul away the old door.

What moves the price
Every door is quoted after we see it, because the opening and frame matter as much as the door you pick. We put each item on the quote so you can see where the money goes. We also offer $0 Down on the whole project, which can help you move before the door gets worse.
- Material
- Steel costs less and is very secure. Fiberglass resists dents and handles heat and humidity without swelling, and it can look like stained wood.
- Glass and sidelights
- Decorative glass, sidelights and transoms add parts and labor. A larger opening with sidelights is a bigger job than a single slab.
- Frame condition
- A sound frame keeps the price close to the quote. Rotted jambs or a soft subfloor under the threshold add repair work, which we show you before doing.
- Size and custom fit
- Standard sizes are usually quicker and cheaper. Older or odd-sized openings may need a custom-built door.
Entry door questions we hear
Something not covered here? (903) 437-8776
Steel or fiberglass: which should I pick?
Both work well here. Steel is strong and a good value, but it can dent and gets hot in direct sun. Fiberglass costs a bit more, doesn't rust or rot, and holds up better on a door facing west. We'll suggest what fits your door and your budget.
How long will my home go without a front door?
For most single doors, the old one comes out and the new one goes in on the same day. Doors with sidelights or frame repairs can take longer, and you'll know that in advance.
Can you keep the opening the same size?
Usually, yes. Widening the door or adding sidelights means cutting into the wall and reframing, and we can price that on its own so you can compare.
Does it make sense to replace the entry and storm doors together?
Often it does. The storm door attaches to the entry door frame, so doing both at once avoids a second install. Our storm doors page shows the options.
Can I pay for it over time?
Yes. We offer 0% Financing options and $0 Down on the whole project. We go over the terms at your consultation, so you know the plan before anything is ordered.

Plan your new entry door now
We serve Celeste, Greenville, Farmersville and nearby towns. We will look at your door, tell you how much time it has left and give you a written quote you can plan around.